| SPECIFICATIONS |
| The Active Resonance Controller is available in two versions |
| PRODUCT CODE |
FREQUENCY RANGE |
ENVIRONMENT |
| INF-102(A) |
1-400khz |
For operation in air only |
| INF-102(AL) |
1-400kHz |
For operation in air (1- 400kHz) and liquid (1-50kHz) |
| Minimum reference
input: |
2 mV rms (equating
to an actual drive of 0.66 mV rms) |
|
| Phase resolution: |
0.1º |
|
| Phase variation: |
maximum 5.0º/
10kHz |
|
| User Interface: |
Phase: Digital Gain:
Analogue |
|
| Conformity: |
CE compliant |
|
| Dimensions: |
345mm wide x 140mm
high x 345mm deep |
|
| Weight: |
7.75 kg |
|
| INPUT/OUTPUT |
CONNECTOR TYPE |
CHARACTERISTICS |
| Mains Supply Voltage |
IEC |
230 V ac, 50 Hz, 40 VA or
115 V ac, 60 Hz, 40 VA |
|
| Input |
37-way D type DIN |
|
|
| Output |
37-way D type DIN |
|
|
| Sensor input |
BNC |
0 V ptp to 10 V ptp, 0 V offset,
1 kHz to 400 kHz |
|
| Control input |
BNC |
3 mV ptp to 10 V ptp, 0 V offset,
1 kHz to 400 kHz |
|
| Output |
BNC |
0 V ptp to 10 V ptp, 0 V offset,
1 kHz to 400 kHz |
|
| 2 additional outputs for monitoring various signals in the feedback circuit |
BNC |
0 V peak-peak to 10 V peak-peak
0v offset, 1 khz to 400 khz |
|
| COMPATABILITY & VERSATILITY |
The ActivResonance Controller is fitted with 37-way D and general purpose BNC connectors.
This gives the flexibilty to interface the ActivResonance Controller to any scanning probe
microscope, whether the cantilever is being driven acoustically or magnetically. |
| UPGRADING |
A
simple software upgrade allows the user to upgrade an
ActivResonance Controller
A to an AL when required. |
